Treated Pine Timber 50 x 200 x 5950mm – Termite Resistant
Treated Pine Timber 50 x 200 x 5950mm – Termite Resistant
Treated Pine Timber – 50 x 200 x 5950mm | Termite & Borer Resistant
This structural-grade treated pine timber offers exceptional strength, durability, and long-term protection against termite attack, wood-boring insects, and fungal decay. Pre-treated with a high-penetration preservative, this timber is ready for use in demanding construction and outdoor applications where untreated timber would be at risk. At 5950mm in length, it is ideal for spanning large structural bays with minimal joins.
Key Features
- Termite & Borer Resistant: Factory-treated with a deep-penetrating preservative to protect against subterranean and dry-wood termites, borers, and fungal rot
- Structural Grade: Suitable for load-bearing and structural applications including floor joists, wall frames, roof rafters, and decking subframes
- Generous Dimensions: 50mm x 200mm cross-section provides high bending strength and load capacity
- Long Length: 5950mm allows for efficient spanning of large bays and reduces the number of joints in the structure
- Stable & Seasoned: Kiln-dried or seasoned to reduce warping, twisting, and shrinkage after installation
- Workable: Easy to cut, drill, nail, screw, and paint or stain to suit project requirements
- Eco-Conscious Treatment: Treated to comply with industry preservation standards for safe use in residential and commercial construction
Technical Specifications
- Species: Pine (Pinus radiata or equivalent structural pine)
- Nominal Size: 50mm x 200mm x 5950mm
- Treatment: Termite & borer resistant preservative treatment (CCA, ACQ, or equivalent)
- Grade: Structural / Construction Grade
- Surface: Rough sawn or dressed (DAR) – confirm with supplier
- Application Class: Suitable for above-ground and in-ground contact applications (depending on treatment level)
- Moisture Content: Kiln-dried to ≤19% for dimensional stability
Typical Applications
- Floor joists and bearer systems
- Roof rafters, purlins, and ridge beams
- Wall framing and stud work
- Decking subframes and pergola structures
- Retaining wall construction
- Formwork and temporary structures
- Fencing posts and rails
Handling & Storage
- Store flat on level bearers off the ground to prevent bowing or warping
- Keep covered and away from direct rainfall prior to installation
- Allow timber to acclimatise to site conditions before fixing
- Wear gloves when handling treated timber; wash hands after contact
- Do not burn treated timber offcuts – dispose of in accordance with local regulations
Installation Notes
When cutting or machining treated timber, always wear a dust mask and safety glasses. Re-treat all cut ends with an appropriate end-grain preservative to maintain full termite and decay protection. Use hot-dipped galvanised or stainless steel fixings to prevent corrosion reactions with the preservative treatment.
Quality Materials
Quality Materials
Every piece is selected for its quality materials, dependable construction, and lasting appeal. From carefully chosen finishes to durable components, our furniture is made to bring comfort and confidence to everyday living.
Material details can vary by product. Please refer to each listing for specific materials, finishes, and care recommendations.
Materials & Care
Materials & Care
Our furniture is selected for dependable quality, thoughtful construction, and materials suited to everyday living. Please check each product listing for its specific materials, finish, and construction details.
To keep your piece looking its best, dust regularly with a soft, dry cloth and clean spills promptly. Use a slightly damp cloth only when appropriate for the finish, then dry thoroughly. Avoid abrasive cleaners, harsh chemicals, excess moisture, and prolonged direct sunlight. For upholstered or specialty materials, follow the care guidance provided with the product.
With routine, material-appropriate care, your furniture can remain a comfortable and lasting part of your home.
Furniture Shopping Tips
Furniture Shopping Tips
- Measure your room and doorways before ordering to make sure each piece will fit comfortably.
- Think about how you use the space and choose furniture that suits your daily routines and storage needs.
- Check product dimensions, materials, and care details to find pieces that work for your home and lifestyle.
- Coordinate colours, textures, and finishes with items you already own for a cohesive island-home look.
- For larger furniture, plan the layout in advance and leave enough room to move around with ease.
Share
How can we help?
Choose a message to start a conversation.